5 in 1,Plasma CUT/MIG/HF TIG/Lift-TIG/MMA



● 5 in 1, Take one more project with one machine that include MIG, Plasma CUT, HF TIG, Lift-TIG, Stick,

● 4 rollers driver-stable and powerful wire feeding ability, make sure quality MIG welding performance.

● CMT 250 ACDC can go where the work is, plus the added convenience of one machine versus two or more, Lightweight & portable - only 15 kg and measuring 530 x 230 x 380 mm.

● Plasma Cutting ability- cuts up to 15mm mild steel

● Synergic MIG welding -Simplifies setup by recommending optimal welding parameters for each welding procedure.

● Dependable TIG ignition--provides High-Frequency, non-contact arc starting to eliminate tungsten and material contamination time after time.

Memory Capability - Easily recall saved settings to get welding faster.

CMT 250 ACDC Weld Cutter is the only machine combines multi welding process and plasma cutting function. Highlyversatile and portable the CMT250 ACDC can be used in the workshop or on-site by contractors, general fabrication, sheetmetal, maintenance/repair, rural.

Input Power Voltage/Hz1Phase~AC 230 (+15%) /50-60Hz
Rated Input Power (KVA)
Output Current Range(A)20~4030~ 20010~ 20010~170
Output Voltage Range(V)88~9616~2410.4~1820.4~26.8
No Load Voltage(V)270V 72727272
Duty Cycle Imax(40"C)40A@40%200A@25%200@35%170A@20%

Max Cutting Thicknesss 20mmN/AN/AN/A
Rated Cutting Thicknesss15mms15mms15mms15mm
Power Factor0.
Protection ClassIP 21SIP 21SIP 21SIP 21S
Insulation ClassFFFF
Size (LxWxH)550*.200*390550*.200*390550*.200*390550*.200*390
Weight (Kgs)-14.514.514.514.5