CMT 250 Weld-Cutter
5 in 1,Plasma CUT/MIG/HF TIG/Lift-TIG/MMA
Features
● 5 in 1, Take one more project with one machine that include MIG, Plasma CUT, HF TIG, Lift-TIG, Stick,
● 4 rollers driver-stable and powerful wire feeding ability, make sure quality MIG welding performance.
● CMT 250 can go where the work is, plus the added convenience of one machine versus two or more, Lightweight & portable - only 15 kg and measuring 530 x 230 x 380 mm.
● Plasma Cutting ability- cuts up to15mm mild steel
● Synergic MIG welding -Simplifies setup by recommending optimal welding parameters for each welding procedure.
● Dependable TIG ignition--provides High-Frequency, non-contact arc starting to eliminate tungsten and material contamination time after time.
● Memory Capability - Easily recall saved settings to get welding faster.
CMT250 | ||||
Input Power Voltage/Hz | 1Phase~AC 230 (+15%) /50-60Hz | |||
Function | CUT MIG | TIG | MMA | |
Rated Input Power (KVA) | 6.5 8.1 | 6.1 | 7.1 | |
Output Current Range(A) | 20~40 30~ 200 | 10~ 200 | 10~170 | |
Output Voltage Range(V) | 88~96 16~24 | 10.4~18 | 20.4~26.8 | |
No Load Voltage(V) | 270V 72 | 72 | 72 | |
Duty Cycle Imax(40"C) | 40A@40% 200A@25% | 200@35% | 170A@20% | |
25A@100% 100A@100% | 118A@100% | 76A@100% | ||
Max Cutting Thickness | s 20mm N/A | N/A | N/A | |
Rated Cutting Thickness | s15mm | |||
Efficiency | 85% | |||
Power Factor | 0.7 | |||
Protection Class | IP 21S | |||
Insulation Class | F | |||
Size (LxWxH) | 550*.200*390 | |||
--ight (Kgs)- | 14.5 |
|